HPE2-T37 試験問題と解答 - 模擬練習 - 練習問題・模擬試験

Question No : 1
Which statement about access to HPE Onboard Administrator is true when an HPE BladeSystem enclosure is added to HPE OneView?

A.It is blocked when an HPE BladeSystem enclosure is managed using HPE OneView.
B.It is enabled only when an HPE BladeSystem enclosure is monitored using HPE OneView.
C.It is enabled when an HPE BladeSystem is either managed or monitored using HPE OneView.
D.It is blocked when HPE BladeSystem enclosure is monitored using HPE OneView.

正解:

Question No : 2
Refer to the exhibit.

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository .
How should you respond?

A.The refresh procedure must be performed on each logical enclosure to refresh firmware.
B.All of the components are up to date and compliant with firmware baseline.
C.The firmware repository service must be restarted using maintenance connection.
D.The firmware repository is not defined within firmware compliance report.

正解:

Question No : 3
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?

A.A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
B.A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
C.A logical enclosure is created automatically, and it is always based on a single enclosure.
D.A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.

正解:

Question No : 4
Which statement about HPE OneView Global Dashboard is true?

A.It is an application that can be installed on Windows or Linux system that will provide automated discovery of HPE OneView instances
B.It is a plugin to HPE Oneview that will allow integration of HPE oneView with VMware management and monitoring components
C.It is a virtual appliance that can aggregate health and inventory information from multiple HPE OneView appliances or HPE Composers
D.It is a plugin to vCenter Server that will allow management of the components added to HPE Oneview from vCenter server interface

正解:

Question No : 5
Which statement about the volume template is true?

A.Users will be able to change sharing type and volume capacity
B.A volume created using this template will not support deduplication
C.A volume created using this template mil not support snapshots
D.Users will be able to select storage pool during volume creation

正解:

Question No : 6
You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?

A.When storm control or loop protection will be enabled for Virtual Connect modules
B.When each of the frames has two Virtual Connect modules installed
C.When each Virtual Connect module is installed in different frame
D.When each Virtual Connect module is installed in different fabric

正解:

Question No : 7
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment.
From which level must this procedure be initiated?

A.Logical Enclosure
B.Logical Interconnect Group
C.Logical Interconnect
D.Server Profile

正解:
Explanation:
Reference: https://cdn.cnetcontent.com/syndication/feeds/hp-ent/inline-content/S7/C/D/CD7C939EFCECEA1124D03234E6E25BC684192820_source.PDF

Question No : 8
HOTSPOT
As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

正解:

Question No : 9
Which action is allowed on storage pools managed by HPE OneView?

A.Volume provisioning
B.Setting storage pool replication
C.Changing storage pool RAID level
D.Changing storage pool capacity

正解:
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=emr_na-c03934110

Question No : 10
HOTSPOT
Click the option that will allow you to update the firmware of master and satellite modules.

正解:

Question No : 11
You originally configured boot mode for HPE ProLiant Gen10 server to ‘Legacy BIOS’ in an HPE OneView server profile and deployed an operating system. A few weeks later, you change the boot mode to the ‘UEFI optimized’ to leverage some features provided by this mode.
What must you do next?

A.reset an il_0 management processor to activate the new boot mode for the server
B.reinstall an operating system, as UEFI is using different drive format than Legacy BIOS
C.reset BIOS settings to the defaults so UEFI settings can be applied
D.reset BIOS settings to the defaults through the server profile after changing the boot mode

正解:
Explanation:
Reference: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026113en_us&docLocale=en_ US

Question No : 12
Which statement about an HPE OneView server profile is true?

A.A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
B.A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
C.A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
D.A server profile can be used to update firmware and drivers when the operating system on the server is up and running.

正解:

Question No : 13
HOTSPOT
Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

正解:

Question No : 14
How will setting the Purpose field within the network definition of a server profile impact the network traffic?

A.network purpose can give higher priority for a specific type of traffic
B.network purpose will impact the traffic only if Virtual Connect modules are used
C.network purpose will define QoS within Logical Interconnect
D.network purpose does not affect the behavior of the network

正解:

Question No : 15
What step must be taken to add an HPE SuperDome Flex to an existing OneView environment

A.A Rack Management Controller must be added to HPE OneView.
B.HPE Superdome Flex can be added to HPE OneView after at least one nPAR is created.
C.Each HPE Superdome Flex chassis must be added Individually using BMC I
D.HPE Superdome Flex complex can be added by adding base chassis of this complex.

正解:

HP HPE2-T37 問題練習